Epson EPL-7500 User Manual - Page 190
Apple Talk Interface, You printer is equipped with an 8-pin AppleTalk interface for use
View all Epson EPL-7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Signal RS-232C Pin 20 DTR RS-422 22 RING Direction OUT ignored Description Data terminal ready. This pin indicates whether or not the printer is ready to receive data. If the printer ready protocol is not selected, this pin is always high (i.e. the printer IS ready to receive data). If printer ready protocol is selected, the printer can accept data when the pin level is high, and cannot accept data when the pin level is low. When the DTR signal goes low the host computer must stop sending data within 128 characters. Can be set high or low with SelecType. • Although RTS, CTS, DSR, DTR, and DCD are designated as RS232C signals, they can also be used when RS-422 is selected with SelecType. AppleTalk You printer is equipped with an 8-pin AppleTalk interface for use with the Apple Macintosh. 8-16 Technical Specifications