Epson EPL-7500 User Manual - Page 214
Removing the face-up output tray, Replace the rear cover with the four screws.
View all Epson EPL-7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
The Face-up Output Tray Then set the OUTPUT option in SelecType Level 1 for face-up paper delivery. See Chapter 3 for instructions on using Selectype. Removing the face-up output tray When you need to remove the face-up tray from the printer for transportation or other purposes, follow the steps below. 1. Remove the face-up tray from the drive unit. 2. Using a screwdriver, remove the four screws from the drive unit and remove the drive unit. 3. Replace the rear cover with the four screws. CAUTION: Never turn on the printer unless the rear cover or the face-up tray drive unit is installed. You may cause mechanical failure. Appendix A A-19
The Face-up Output Tray
Then set the OUTPUT option in SelecType Level
1
for face-up
paper delivery. See Chapter 3 for instructions on using Selectype.
Removing the face-up output tray
When you need to remove the face-up tray from the printer for
transportation or other purposes, follow the steps below.
1.
Remove the face-up tray from the drive unit.
2. Using a screwdriver, remove the four screws from the drive
unit and remove the drive unit.
3. Replace the rear cover with the four screws.
CAUTION:
Never turn on the printer unless the rear
cover or the face-up tray drive unit is installed. You may
cause mechanical failure.
Appendix A
A-19