Epson EPL-7500 User Manual - Page 212
below. Partially tighten each screw in the order indicated by, all screws are fully tightened.
View all Epson EPL-7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
The Face-up Output Tray 5. Carefully fit the drive unit into the opening in the back of the printer with the blue paper path lever in the upper right corner of the opening. 6. Insert the four screws in the holes in the drive unit, as shown below. Partially tighten each screw in the order indicated by the numbers below. Repeat this gradual tightening process until all screws are fully tightened. Appendix A A-17
The Face-up Output Tray
5.
Carefully fit the drive unit into the opening in the back of the
printer with the blue paper path lever in the upper right corner
of the opening.
6.
Insert the four screws in the holes in the drive unit, as shown
below. Partially tighten each screw in the order indicated by
the numbers below. Repeat this gradual tightening process until
all screws are fully tightened.
Appendix A
A-17