Epson EPL-7500 User Manual - Page 62
Connecting a serial interface cable, RS-232, RS-422
View all Epson EPL-7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Connecting the Printer to Your Computer Connecting a serial interface cable The EPL-7500 has two serial channels, one wired to a 25-pin (RS-232) connector, and the other to an S-pin (RS-422) connector, either of which can be used for conventional asynchronous serial communication. If you want to use one of the printer's serial interfaces, make sure that you have a properly shielded cable and that it is the correct one for your computer and the EPL-7500. Be sure to change the SelecType Level 2 INTERFACE setting to the serial mode you want to use before you connect the interface. Save the new setting with the SAVE LEVEL 2 option. See Chapter 3 for instructions on changing SelecType settings. Connecting the RS-232 serial interface cable Follow these steps to connect the RS-232 serial interface cable: 1. Turn off both the printer and computer. Then unplug the power cord from the electrical outlet. 2. Plug the cable connector securely into the CH S2 serial interface as shown below. 2-22 Testing and Connecting Your Printer