Epson PowerLite Pro Z8455WUNL Operation Guide - EasyMP Multi PC Projection - Page 39

Error Message List 39 Error Messages Remedy Cannot start from the shortcut while the Option screen is The Option screen is displayed. Close the Option screen. displayed. Close the Option screen, and then try opening the shortcut again. The slide show may will not begin until PowerPoint is restarted. Close PowerPoint, and then start again. Error Messages when Searching for and Selecting Projectors Error Messages Cannot join. The maximum number of participants has been exceeded. The keyword does not match. Re-enter the keyword displayed on the projector screen. Connection failed due to keyword mismatch. Updating display configuration. Please try again in a few minutes. Select another projector. One or more projectors are not responding. A network error occurred. Connection to the projector failed. Remedy 32 computers are already connected to the projector. Disconnect users and projectors that are not projecting screens. s "Ending the Meeting" p.25 Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword. If a user is already connected, check the Projector Keyword with the connected user. Reconnect to the projector. Enter the Projector Keyword on the keyword entry screen displayed when you connect. Check the Projector Keyword that is displayed on the projector's LAN standby screen. If a user is already connected, check the Projector Keyword with the connected user. When another user is already connected, you can only connect to the projectors in the combination selected by the other user. Select a projector from the same combination as the user who is already connected, or select a projector that is in standby status. You cannot connect to multiple projectors simultaneously. Check the network settings on the computer and the network settings on the projector. Try connecting again. If it still does not connect, check the network settings on the computer and the network settings for the projector. Cannot connect to a projector that is already connected using EasyMP Network Projection. Check if the projector you want to connect to is already connected to EasyMP Network Projection.