Epson Pro L1060U Users Guide - Page 113
Adjusting the Image Position Using Screen Position, ELPLX01/ELPLX01W ultra short-throw lens, Shift
View all Epson Pro L1060U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
ELPLX01/ELPLX01W ultra short-throw lens 1 Center of lens 2 Projected image when lens shift is set to the home position 3 Maximum range: V × 17% 4. When you are finished, press the Esc button on the control panel or remote control. Note: When adjusting the image height, position the image lower than where you want it to be and then move it up. This will help prevent the image from moving down after adjustment. The image is clearest when the lens is at the home position. To move the lens to the home position, press and hold the Lens Shift button on the remote control or the Lens button on the control panel for at least three seconds. Parent topic: Using Basic Projector Features Adjusting the Image Position Using Screen Position You can adjust the image position if there are margins between the edge of the image and the projected screen frame. Note: You cannot adjust the screen position if the Screen Type setting is set to 16:10 for a WUXGA projector model or 4:3 for a XGA projector model. 1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Extended menu and press Enter. 113