Epson Pro L1060U Users Guide - Page 248
HDBaseT Signal Level, Light Source Hours
View all Epson Pro L1060U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Setting Projector Info Light Source Info Options Operation Hours Source Input Signal Resolution Refresh Rate Sync Info Status Serial Number Lens Type Event ID HDBaseT Signal Level Light Source Hours Estimated Remains Description Displays the number of hours the projector has been used since it was turned on Displays the name of the port to which the current input source is connected Displays the input signal setting of the current input source Displays the resolution of the current input source Displays the refresh rate of the current input source Displays information that may be needed by a service technician Displays information about projector problems that may be needed by a service technician Displays the projector's serial number Displays the model number of the installed lens Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes Displays the image signal information from the HDBaseT port Displays the number of operating hours for each of the projector's Light Source Mode settings If the Constant Brightness setting is enabled, displays the remaining number of hours the projector can maintain constant brightness 248