Epson Pro L1060U Users Guide - Page 40
Connecting to a Computer for 5 BNC Video, Connecting to an HDBaseT Transmitter, DVI-D, Parent topic
View all Epson Pro L1060U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. Connect the other end to the projector's DVI-D connector. Parent topic: Connecting to Computer Sources Connecting to a Computer for 5 BNC Video You can connect the projector to your computer using an optional VGA-to-5-BNC cable. 1. Connect the VGA connector to your computer's monitor port. 2. Connect the 5 BNC connectors to the projector's BNC ports. Parent topic: Connecting to Computer Sources Connecting to an HDBaseT Transmitter To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional HDBaseT transmitter using a 100Base-TX network cable. This is useful when you want to send a signal to or control the projector from a remote location, such as in a hall or event site, since you can use a network cable up to 328 feet (100 m) in length. To ensure proper data transmission, use a Category 5e STP cable or better. 40