Epson Pro L1060U Users Guide - Page 214
USB-A, Caution, flashing, the On/Standby light turns blue and the projector enters standby mode.
View all Epson Pro L1060U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
4. Insert the flash drive into the USB-A port. Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly. 5. Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet. 6. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release the Esc button. The lights flash to indicate that settings are transferring to the flash drive. When the lights stop flashing, the On/Standby light turns blue and the projector enters standby mode. Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This could damage the projector. 7. Once the projector enters standby mode, remove the flash drive. 214