Epson Pro L1060U Users Guide - Page 64

7. Do one of the following: • Press the LAN button on the remote control. • Select Display the QR Code in the projector's Network menu. • Press the Home button on the remote control and select Display the QR Code on the Home screen. Your projector displays the QR code on the projection surface. Note: If you do not see the QR code after pressing the LAN button, press Enter to display it. 8. Start Epson iProjection on your mobile device. 9. Use the QR code reader feature to read the QR code and connect your device to the projector. Visit epson.com/iprojection (U.S.) or epson.ca/iprojection (Canada) for instructions. Parent topic: Wireless Network Projection Using Quick Wireless Connection (Windows) You can create a Quick Wireless Connection USB Key to quickly connect the projector to a Windows computer wirelessly. Then you can project your presentation and remove the key when you are done. Note: A USB flash drive is not included with your projector. 1. Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection (Windows/Mac) software. Note: See the Epson iProjection Operation Guide (Windows/Mac) for instructions. 2. Turn on the projector. 3. Press the LAN button on the remote control. You see the LAN standby screen. 4. Verify that an SSID and IP address are displayed. 5. Remove the wireless LAN module from the projector. 6. Insert the USB key into the same port used for the wireless LAN module. You see a projected message that the network information update is complete. 7. Remove the USB key. 64