Epson Pro L1060U Users Guide - Page 269
On/Standby, power light, Status, light, Laser, Temp light, Filter, Status and solution
View all Epson Pro L1060U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
On/Standby Status (power) light light Flashing blue Varies Laser light Varies Temp light Varies Off Flashing Off Flashing blue orange Flashing blue Varies Flashing blue Varies Flashing orange Flashing orange Varies Varies Varies Varies Varies Varies Varies Varies Flashing Varies orange Filter light Orange Off Varies Varies Flashing orange Varies Status and solution Low air flow through the air filter • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • If the problem persists, unplug the projector and contact Epson for help Fan or sensor error; turn the projector off, unplug it, and contact Epson for help Laser error; turn off the projector, unplug it, and contact Epson for help An unsupported lens is attached; remove the unsupported lens and attach a lens that is supported A message to clean or replace the air filter is displayed; turn the projector off, unplug it, and clean or replace the air filter as necessary The projector is unable to maintain constant brightness and the Constant Brightness setting in the Settings menu is disabled Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems Related concepts Air Filter and Vent Maintenance 269