Epson Stylus COLOR 3000 User Manual - Epson Stylus RIP - Page 17
Installing on a Standalone or Print Server System
View all Epson Stylus COLOR 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installing the StylusRIP Software 6. From the Apple menu, open the Chooser and make AppleTalk active. 7. Close the Chooser and restart your Macintosh. Now follow the instructions in the next section to install the StylusRIP software. Installing on a Standalone or Print Server System Before you begin installing the StylusRIP software, check that the StylusRIP Disk 1 diskette is not write-protected. Do not copy the diskette; you must use the original in the steps below. 1. Turn on your printer. Then restart your Macintosh with all extensions turned off except your CD-ROM drive. 2. Insert the StylusRIP Disk 1 diskette in a diskette drive and the StylusRIP CD-ROM in a CD-ROM drive. Note: Double-click the README icon to read the latest information on the StylusRIP software and check for any additional installation steps. 3. Double-click the Installer icon in the Disk1 window. 4. At the title screen, click Continue. 1-4