Epson Stylus COLOR 3000 User Manual - Epson Stylus RIP - Page 21

connected the printer to a network card and use AppleTalk, viaserial cable

Get Epson Stylus COLOR 3000 - Ink Jet Printer PDF manuals and user guides View all Epson Stylus COLOR 3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Installing the StylusRIP Software 2. Click Install. You see the Updater dialog box: 3. Make sure your printer model name appears in the Printer box. If it doesn't appear, click the arrow in the box and select it from the list. If you're on a network and the printer has a network interface installed, click Net Scan so the software can find it for you. 4. Select the printer connection. If you connected the printer via a serial cable, select the printer or modem port. If you connected the printer to a network card and use AppleTalk zones, select the zone where it is located. 5. Click Update. You see a dialog box asking you to confirm the printer model. If it's correct click Install; if not, click Stop and check your selections in steps 5 and 6. You see a message telling you to turn off the printer. 1-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
Installing the StylusRIP Software
1-8
2.
Click
Install
. You see the Updater dialog box:
3.
Make sure your printer model name appears in the
Printer
box. If it doesn’t appear, click the arrow in the box and
select it from the list. If you’re on a network and the printer
has a network interface installed, click
Net Scan
so the
software can find it for you.
4.
Select the printer connection. If you connected the printer
via a serial cable, select the printer or modem port. If you
connected the printer to a network card and use AppleTalk
zones, select the zone where it is located.
5.
Click
Update
. You see a dialog box asking you to confirm
the printer model. If it’s correct click
Install
; if not, click
Stop
and check your selections in steps 5 and 6. You see a
message telling you to turn off the printer.