Epson WorkForce ES-50 Users Guide - Page 79
Light status, Condition/solution, ES-60W/ES-65WR, Wi-Fi AP light
View all Epson WorkForce ES-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Light status The ready light is orange ES-60W/ES-65WR Condition/solution Check the following: • Make sure there are no originals jammed in the scanner. • Make sure the scanner is connected to your computer securely. • If a firmware update fails and the scanner enters recovery mode, update the firmware again using a USB connection. • Disconnect and re-connect the USB cable to the computer. If this does not solve the problem, the scanner may be malfunctioning or the light source in the scanner unit may need to be replaced. Contact Epson for support. 1 Wi-Fi light 2 Wi-Fi AP light 3 battery light 4 Error status light 5 Ready light 79
79
Light status
Condition/solution
The ready light is orange
Check the following:
• Make sure there are no originals jammed in the scanner.
• Make sure the scanner is connected to your computer securely.
• If a firmware update fails and the scanner enters recovery mode,
update the firmware again using a USB connection.
• Disconnect and re-connect the USB cable to the computer. If this
does not solve the problem, the scanner may be malfunctioning or
the light source in the scanner unit may need to be replaced. Contact
Epson for support.
ES-60W/ES-65WR
1
Wi-Fi light
2
Wi-Fi AP light
3
battery light
4
Error status light
5
Ready light