Epson WorkForce ES-50 Users Guide - Page 90
Characters are not Recognized During Conversion to Editable Text (OCR), Black & White
View all Epson WorkForce ES-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
• In Epson ScanSmart, click Settings > Scanner Settings > Scan Settings and try adjusting these settings and scanning again: • On the Main Settings tab, make sure you select the correct Image Type for your original. • On the Main Settings tab, try increasing the Resolution setting. • On the Advanced Settings tab, select Text Enhancement and choose a setting. Note: The Text Enhancement setting depends on the selected Image Type. • If the Image Type is set to Black & White, adjust the Threshold setting on the Advanced Settings tab. (The Image Option must be set to None.) Parent topic: Solving Scanned Image Quality Problems Related tasks Changing the Scan Settings Characters are not Recognized During Conversion to Editable Text (OCR) If characters in your scanned images are not recognized during OCR conversion, try these solutions: • Make sure your original is loaded straight on your product. • Use an original with clear text. • Adjust these Epson Scan 2 settings (if available) and try scanning again: • Select the correct Image Type setting. • If the Image Type is set to Black & White, adjust the Threshold setting. • Set the Image Type to Grayscale. • Set the scanning resolution between 200 and 600 dpi. • If the original document is in landscape mode, set the Rotate setting to Auto in Epson Scan 2. • If you are using OCR software, check the manual for any additional adjustments. Parent topic: Solving Scanned Image Quality Problems Related tasks Changing the Scan Settings 90