Fluke 116 CAL Product Manual - Page 10
Display Test
View all Fluke 116 CAL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
True-rms Multimeter Performance Tests Display Test 110/114/115/116/117 Push K and turn the rotary switch to the e position. Compare the display with the example in Figure 3. Check all segments for clarity and contrast. 113 Push K and turn the rotary switch to the k CHEK position. Compare the display with the example in Figure 3. Check all segments for clarity and contrast. Figure 3. Display Segments Backlight Test To test the backlight, press Q and verify that the backlight turns on. Keypad Test 110/114/115/116/117 To test the keypad: 1. Turn the rotary switch to . 2. Push each button separately. Each button push should cause the Meter to beep and activate a display annunciator. 3. To reset the Meter, turn the rotary switch to Off and then back to the On position. 113 To test the keypad: 1. Turn the Meter to Ω 2. Push each button separately. Each button push should cause the Meter to beep and activate a display annunciator. 3. To reset, turn off the Meter, and then back to any function position. MyFlukeStore Shop for Fluke products online at: www. 7 .com 1.888.610.7664