Fluke 116 CAL Product Manual - Page 8
Features, Table 1. Features, Switch, Position, Measurement Function
View all Fluke 116 CAL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
True-rms Multimeter Features Features Table 1 is a list of the features for each Meter. Table 1. Features Switch Position Measurement Function 110 113 114 115 116 117 OFF The Meter is turned off. x Automatically selects ac or dc volts based on the sensed input with a low impedance input. e AC voltage from 0.06 V to 600 V. Frequency from 5 Hz to 100 kHz. D DC voltage from 0.001 V to 600 V. l AC voltage from 6.0 to 600 mV, dc-coupled. DC voltage from 0.1 to 600 mV. Ω s k CHEK Ohms from 0.1 Ω to 40 MΩ. Ohms from 0.1 Ω to 60 kΩ. Continuity beeper turns on at 250 Ω. LoZ low impedance measurement function to simultaneously test for voltage or continuity. R Diode Test. Displays OL above 2.0 V. S Farads from 1 nF to 9999 μF. AC current from 0.1 A to 10 A (>10 to 20 A, 30 seconds j on, 10 minutes off). >10.00 A display flashes. >20 A, OL is displayed. DC-coupled. Frequency from 45 Hz to 5 kHz. DC current from 0.001 A to 10 A (>10 A to 20 A, I 30 seconds on, 10 minutes off). >10.00 A display flashes. >20 A, OL is displayed. $ DC current from 0.1 to 600 μA. AC current from 6.0 to 600 μA. DC-coupled. y Temperature from -40 °C to 400 °C (-40 °F to 752 °F) with K-type thermocouple w Non-contact sensing of ac voltage. Note: All ac functions and Auto-V LoZ are true-rms. AC voltage is ac-coupled. Auto-V LoZ, AC mV and AC amps are dc-coupled. MyFlukeStore Shop for Fluke products online at: www. 5 .com 1.888.610.7664