Frigidaire FGMC3066UF Complete Owners Guide - Page 36

36

SETTING OVEN CONTROLS

Steam Clean

The Steam Clean feature offers a chemical free and time

saving method to assist in the routine cleaning of small and

light soils. For heavier baked on soils use the Self Clean

feature.

Be sure the oven is level and cool before starting Steam

Clean. If the oven temperature is above room temperature

a triple beep will be heard and the function will not start.

Steam Clean produces best results when started with a cool

oven.

To set a Steam Clean cycle:

1.

Remove all racks and oven accessories.

2.

Scrape or wipe loose debris and grease from the oven

bottom.

3.

Pour 1 cup of tap water onto the oven bottom.

(

Figure 26

) Close oven door.

4.

Press

Steam Clean.

5.

Press

OK/START

.

St C

will appear in the display.

6.

To see time remaining in the Steam Clean cycle press

Steam Clean

key. The time left will show in the display

for 6 seconds before returning to the time of day. Do not

open the door during this time. If door is opened during

Steam Clean for more than 4 minutes, d-O will appear

in the display and the display will sound a triple beep

until the door is closed.

7.

When the steam clean cycle is complete an alert will

sound and the END message will show in the display.

Press off to return to the clock.

8.

Take care opening the door when the steam clean is

finished. Stand to the side of the oven out of the way of

escaping vapor.

9.

Wipe oven cavity and bottom. Do not clean oven door

gasket (

Figure 27

). Avoid leaning or resting on the oven

door glass while cleaning cavity.

10.

To cancel Steam Clean at any time press

OFF

.

Important:

Opening oven door during Steam Clean cycle

prevents the water from reaching the temperature needed

to clean. If the door is left open once Steam Clean starts, an

alarm will sound alerting you to close the door.

•

Opening oven door during Steam Clean cycle prevents

the water from reaching the temperature needed to

clean.

•

For best results, clean oven immediately after the cycle

is complete. Steam clean works best for soils on the

oven bottom.

•

Place a paper towel or cloth in front of the oven to

capture any water that may spill while wiping out.

•

A non abrasive scouring pad, stainless steel sponge,

plastic scraper, or eraser style cleaning pad (without

cleaner) can be used for difficult soils. Moisten pads

with water before use.

•

Do not leave the residual water in the oven for any

length of time.

•

Some condensation or water vapor may appear close to

the oven vent. This is normal. The oven gasket may

become damp; do not wipe dry.

•

Local water sources often contain minerals (hard

water). If hard water deposits occur, wipe cavity with a

50/50 solution of water and vinegar or 50/50 solution of

lemon juice and water.

•

Steam clean cannot be programmed with a delay start.

•

If Steam Clean results are not satisfactory, run a Self

Clean. See

“Self Clean”

on

page 34

.

Do not add bleach, ammonia, oven cleaner, or any other

abrasive household cleaners to the water used for Steam

Clean. Before cleaning any part of the oven, be sure all

controls are turned off and the oven is cool. The oven

may be hot and can cause burns.

Figure 26:

Add 1 cup of tap water

CAUTION

Figure 27:

Clean around the oven door gasket

Section	Page
Product Record and Registration	2
Important Safety Instructions	3
Cooking Recommendations	12
Before Setting Oven Controls	15
Setting Oven Controls	17
About Your Microwave Oven	37
Radio or TV Interference	37
About Microwave Cooking	37
About Foods	38
About Utensils and Coverings	39
Accessories	39
About Children and the Microwave	40
About Food Safety	40
Preparing Food for Microwave Cooking	41
Table 1: Preparing food for microwave	41
Microwave Features	43
Figure 1: Microwave features	43
Display	43
Figure 2: Microwave display	43
Before Operating the Microwave	43
Control Panel	44
Figure 3: Microwave Control Pad	44
1. Lock: Use to lock the controls to prevent accidental use.	44
2. Settings / User Preferences	44
3. Presets	44
4. Melt/Soften	44
5. Auto Cook	44
6. Sensor Cook	44
7. Power level (10 power levels available)	44
8. Timer On-Off	44
9. Number Keys	44
10. START/+30Sec.	44
11. STOP/Cancel: Clears all previous settings if pressed before cooking starts. During cooking, press once to pause (and START to resume); press twice to stop and clear all entries.	44
Quick Start	45
Timed Heating	45
1. Use the number pad to enter the time in minutes and seconds. For example, to heat for 5 minutes and 30 seconds, enter 5 3 0.	45
2. Press START.	45
Timer	45
1. Press Timer On-Off.	45
2. Use the number pad to enter the time in minutes and seconds. For example, to heat for 5 minutes and 30 seconds, enter 5 3 0.	45
3. Press Timer On-Off.	45
Setting Power Level	45
1. Use the number pad to enter the time in minutes and seconds. For example, to heat for 5 minutes and 30 seconds, enter 5 3 0.	45
2. Press the Power Level pad until the desired level displays. For example, press once for high power (PL- HI). Press Power Level four times to change to 70% power (PL-70). The selected power level appears in the display.	45
3. Press START.	45
Multi-Stage Cooking	45
1. Use the number pads to enter the time for the first stage.	45
2. Press Power Level until the desired power for the first stage is shown.	45
1. Use the number pads to enter the time for the second stage.	45
2. Press Power Level until the desired power for the second stage is shown.	45
3. Press START.	45
Add Cook Time (+30 Sec)	46
Defrost	46
1. Press Defrost until the correct food type displays.	46
Table 1: Defrost Settings	46
2. Press START.	46
3. Use the numeric keys to enter the weight of the food in pounds. The setting can be from 0.1 to 6.0 lbs.	46
4. Press START.	46
Popcorn	46
1. Press Popcorn until the correct popcorn amount displays.	46
Table 2: Popcorn Settings	46
2. Press START.	46
Potato	46
1. Press Potato.	46
2. Press START.	46
Veggies	47
1. Press Veggies until the correct vegetable type displays.	47
Table 3: Popcorn Settings	47
2. Press START.	47
Beverage	47
1. Press Beverage until the correct amount displays.	47
Table 4: Defrost Settings	47
2. Press START.	47
Melt / Soften	47
1. Press Auto Cook until the correct food type displays.	47
Table 5: Defrost Settings	47
2. Press START.	47
3. Press the number key corresponding to the amount of food.	47
4. Press START.	47
Auto Cook	47
1. Press Auto Cook until the correct food type displays.	47
Table 6: Defrost Settings	47
2. Press START.	47
3. If cooking bacon, use the number keys to enter how many pieces (1 to 3) and press START.	47
Sensor Cook	48
Table 7: Popcorn Settings	48
1. Press Sensor Cook until the correct food type displays.	48
2. Press START.	48
Reheat	48
Table 8: Defrost Settings	48
1. Press Reheat until the correct food type displays.	48
2. Press START.	48
3. For soup/sauce, use the number keys to enter the quantity (skip for Default) and press START again.	48
Keypad Lock	48
Set Clock	49
1. Press the Settings pad once. “ENTER TIME” flashes in the display	49
2. Enter the time using the numeric keys.	49
3. Press START.	49
Audible Signal Elimination	49
1. Press the Settings pad twice.	49
2. “VOLUME” shows in the display. “LOW”, “MED”, and “HIGH” will show in a cycle.	49
3. Press START when the desired volume is shown in the display.	49
1. Press the Settings pad 3 times. “Lb / KG” shows in the display.	49
2. Press START to change the setting. “KG” or “LB” will briefly display to show the new setting.	49
Care and Cleaning	50
Before You Call	56

Frigidaire FGMC3066UF Complete Owners Guide - Page 36

Steam Clean

Page 36 highlights