Fujitsu 4340C Operator's Guide - Page 27
Button and LED, Name of the button and, Function - software
UPC - 097564304156
View all Fujitsu 4340C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
I Button and LED Name of the button and LED Button Next Previous Exit Enter Send To/ Start Stop LED Read Check Function Displays the next LCD screen. Displays the previous LCD screen. Moves the cursor to the left. Moves the cursor to the right. When you are entering settings on the Operator panel, pressing this button returns you immediately to the Scanner Ready screen. Enters the parameter currently selected by the cursor. Operational only when Manual start mode is set or the Read lamp lights; Starts the reading when video interface option is used. Some application software packages make use of this button. When the Check LED lights, pressing this button releases the error status (turns off Check and returns to the Scanner Ready screen). Operational only during the reading operation; stops the reading when the video interface option is used. Also turns off the Check lamp. Indicates that the scanner is On. Indicates the scanner is reading or ready to read. If lit, this indicates that an alarm occurred. Pressing the Stop button turns the Check lamp Off. If it blinks at one second intervals, this means that a jam or double feed has been detected. If the problem is jammed paper, removing the jammed paper turns off the Check lamp. If the problem is double feed, pressing the Stop button turns off the Check lamp. If it blinks at four seconds intervals, this means that cleaning the ADF is necessary. G 1-7