Fujitsu 4340C Operator's Guide - Page 68
Description, Selectable, parameters, Default
UPC - 097564304156
View all Fujitsu 4340C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
No Item 14 IPC mode 15 ADF Edge Erasing 16 FB Edge Erasing 17 Select read color 18 Gray mode 19 Remaining ink 20 Print No. Description Selectable parameters When the IPC-4D image processing board is installed in the third party Slot, select this IPC-4D board or the image processing Standard/IPC4D circuit built in the scanner. Left/Right: Adjusts the edge areas to be erased from the image scanned by the automatic document feeder (ADF). 0 to 15 mm Top: 0 to 15 mm Bottom: -7 to +7 mm Left/Right: 0 to 15 mm Adjusts the edge areas to be erased from Top: the image scanned by the flat bed (FB). 0 to 15 mm Bottom: 0 to 15 mm Selects the color to be read in unicolor reading. R/G/B/W Switches between quality priority scanning and speed priority scanning with respect to the default setting when scanning grayscale images. Normal/ Draft/ Quality Displays the remaining amount of ink when the Imprinter option is attached and resets the remaining ink counter when Reset/No replacing the ink. Selects printing of Nos. when the Imprinter option is attached. on/off (Continued) Default Standard Left/Right: 0 mm Top: 0 mm Bottom: 0 mm Left/Right: 0 mm Top: 0 mm Bottom: 0 mm G Normal No off *1) Some restrictions apply to the detection of a double feed. *2) This offset refers to the difference from the value adjusted by automatic offset adjustment. G 7-4