Fujitsu 4340C Operator's Guide - Page 81
Color to be Read in Unicolor Reading, Setting the Grayscale Mode, The default is G Green.
UPC - 097564304156
View all Fujitsu 4340C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
7. At Screen 43, press or to change the top setting. The value changes in 1 mm units. Then press to activate the setting. The scanner displays the next setup item. 17 Color to be Read in Unicolor Reading 1. Press "Next" or "Previous" Screen 44 and let the scanner display Screen 44. ! 19 Re a d = R/ G/ B/ W Co l or 2. At Screen 44, press or to select a light source. Press NOTICES 1.The specification from the host computer has priority. 2.The default is G (Green). if you want to activate the setting. 3. Press to return. 18 Setting the Grayscale Mode 1. Press "Next" or "Previous" Screen 45 to display Screen 45 on the LCD. ! 20 = No r Gr ay Mo d e ma l / Fas t 2. In Screen 45, press or to select "Normal", "Fast" or "Fine". "Normal" refers to the regular mode. When "Normal" is selected, scanning is performed at the machine defaults for image quality and speed. "Fast" refers to the speed priority mode. When "Fast" is selected, scanning is performed at a speed faster than that of the normal mode. "Fine" refers to the quality priority mode. When "Fine" is selected, scanning is performed at a quality higher than that of the normal mode. The lower display of Screen 45 is switched as follows: 1."Normal/Fast" is displayed, and "Normal" flashes. 2."Fast/Fine" is displayed, and " Fast" flashes. 3."Fast/Fine" is displayed, and "Fine" flashes. G 7-17