Fujitsu 4340C Operator's Guide - Page 60
Counter Display, NOTICE, Counter, Function - replacement
UPC - 097564304156
View all Fujitsu 4340C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Counter Display The displays for the Paper and Abrasion counters are shown below: Paper counter Re a d y XXXX XXXXX0 > Abrasion counter Simultaneously press the and panel display as shown below: arrow buttons for at least 1 second, to switch to the Life counter Re a d y * XXXXXX 0 > Life counter Counter Function Paper counter When the button is pressed for at least 1 second The paper counter counts the number of scanned sheets from the start of reading until Paper Empty or an error is detected. The counter is automatically reset at the start of reading. The counter is used for checking the number of the sheets scanned in one batch. When the button is pressed for at least 1 second This counter increments each time a document is scanned. It is not initialized until the power is turned off. The counter can be used, for example, for checking the number of sheets that have been scanned in one day. Abrasion counter The abrasion counter counts the accumulated number of scanned sheets. This counter increments every 10 sheets. It is useful to check the cleaning cycle or the parts replacement cycle. How to reset it is described in Chapter7 "SETUP MODE". Life Counter Keeps a cumulative count of the number of scans made after shipping. This counter increments by 1 after every 10 scans and may be used to estimate of the device's remaining scan life. NOTICE When the counter value is 0, no number is displayed. G 6-2