Fujitsu S510M Operator's Guide - Page 107
Scanning is started and the image data is generated in the specified size.
UPC - 097564307324
View all Fujitsu S510M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
3.5 Various settings according to your needs 7. Press the [SCAN] button . ⇒ Scanning is started and the image data is generated in the specified size. ATTENTION • The image is centered and output in the specified size. When "Automatic detection" is selected in the "Output image size" drop- down list of the "Carrier Sheet Settings" window, an optimal size is selected automatically from the available standard sizes (refer to page 55) and the image is output. • In the "Carrier Sheet Settings" window, when "Automatic detection" is selected in the "Output image size" drop-down list, the size of the produced image may be smaller than the original. Example: When you scan the A5 size image printed at the center of an A4 size paper 3 D A5 size image is output. To output an image in the original size, specify the document size in the [Output image size] drop-down list If the following symptoms are observed, lay the material over a piece of white HINT paper to scan. • The output image is not in a suitable size (when [Automatic detection] is selected). • The outline of the material is shaded. • Black lines appear around the material cut out in an indefinite shape. Basic Scanner Operations white paper ScanSnap S510M Operator's Guide 91