Fujitsu S510M Operator's Guide - Page 145
Cleaning the Inside of the Scanner, ScanSnap, S510M Operator's Guide, Pad ASSY x 1
UPC - 097564307324
View all Fujitsu S510M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
6.3 Cleaning the Inside of the Scanner 2. Clean the following locations with a cloth moistened with cleaner F1. Pad ASSY Eject roller Plastic roller Pick roller Feed roller ATTENTION Glass It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to 6 leave no residue on the surface of the cleaned parts. Daily Care Turn off the scanner before cleaning the following locations. • Pad ASSY (x 1) Remove the dirt on the rubber tabs by wiping downward. When cleaning the Pad ASSY, take care to prevent the cloth from catching on to the metal parts. • ADF glass surfaces (x 2 located on the ADF and the base unit) Wipe off the dirt gently. • Pick roller (x 1) Wipe to clean the roller while turning it with your finger, be careful not to scratch the surface. Take particular care in cleaning the Pick roller since black debris on the roller adversely affect the pickup performance. • Plastic rollers (x 4) Clean them lightly while rotating the rollers with your finger. Take care not to scratch the surface of the rollers. Take particular care in cleaning the plastic rollers since black debris on the rollers adversely affect the pickup performance. ScanSnap S510M Operator's Guide 129