Fujitsu S510M Operator's Guide - Page 139
In the Scan and Save Settings window
UPC - 097564307324
View all Fujitsu S510M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
5.2 Troubleshooting Checklist Symptom Check The Item Out Resolution Sheets of paper are not Is the Pick roller dirty? fed (stops midway). Clean the Pick roller following the instructions in section "6.3 Cleaning the Inside of the Scanner" (page 128). Is the Pick roller worn? Replace the Pick roller following the instructions in "7.3 Replacing the Pick Roller" (page 139). Are there any foreign materials on the document feed path? Remove any foreign materials from the document feed path. Refer to "5.1 Clearing Document Jams" (page 118). Does the loaded document satisfy the conditions described in section "Scanning Different Document Types" (page 30)? If not, they may not pass smoothly through the ADF. Try the following: • Slightly press down the first sheet of the document with your finger at the beginning of scanning. • Change the sheet feeding direction. The file size of a scanned black-andwhite image is the same as that of a color document. Is the black-and-white docu- Select "B&W" from the "Color mode" drop- ment scanned in the color down list on the [Scanning] tab of the mode? "Scan and Save Settings" window. Images on the backside of the pages, which are printedthrough, are overlaid on the scanned image when scanning a double-sided document (print through). Is the "Setting for text only document" checkbox (which is in the "Read Mode Option" window opened by clicking the [Option] button on the [Scanning] tab of the "Scan and Save Settings" window) cleared? Mark the "Setting for text only document" checkbox. Scanned images are not displayed on the screen (when "Allow automatic blank page removal" is enabled). When "Allow automatic blank page removal" is enabled, almost blank documents with only a few characters may be accidentally recognized as blank pages and removed from the scanned image data. In the "Scan and Save Settings" window, select the [Scanning] tab, click the [Option] button, and then clear the "Allow automatic blank page removal" checkbox. Scanned images are skewed (when "Correct skewed character strings automatically" is enabled). Are the document skewed +/-5 degrees or more while it is fed into the ADF? Depending on the contents of the document, the automatic image deskew may not work properly. This deskew function can correct a skew of less than +/-5 degrees. Load the document onto the scanner using the side guide so that the document skew does not exceed this limit. Refer to "Correct skewed character strings automatically." (page 47) Troubleshooting 5 ScanSnap S510M Operator's Guide 123