Fujitsu S510M Operator's Guide - Page 140
select [Help] - [About ScanSnap Manager], then click [Detail], With Automatic detection - scansnap driver
UPC - 097564307324
View all Fujitsu S510M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Symptom Check The Item Out Resolution The orientation of scanned images is not displayed correctly (when "Allow automatic image rotation" is enable.) Depending on the contents of the document, the automatic image rotation may not work properly. For information about the "Allow automatic image rotation" checkbox, refer to "Correcting the orientation of scanned image" (page 68) Letters on the scanned Have you scanned docuimages cannot be read. ments written in small let- ters? When small letters are squashed, select "Excellent" in the Image quality drop-down list on the [Scanning] tab of the "Scan and Save Settings" window, and then re-scan the document. Note: If you scan the document in the Excellent quality, the data size of the scanned image increases and thus time required for scanning is lengthened. The document is not fed properly or gets jammed. Is the inside of the scanner Clean the dirty locations. dirty? The scanned image is chipped/Slant lines are produced on the scanned image/The output image is wider than the original. With "Automatic detection" being selected in the "Paper size" drop-down list, was the document skewed during a scan? Neatly align the edges of paper sheets with Side Guide. * If you are scanning documents of mixed paper sizes, marking the "Scan mixed paper size" checkbox [See "Scanning documents of different widths or sizes at a time" (page 70)], carefully load smaller documents so that they can be fed straight. If those documents cannot be fed straight, it is recommended to scan only documents of about the same size at a time. (*1): To confirm whether the scanner is connected with USB1.1 or USB2.0, click and hold the mouse button on the ScanSnap icon , select [Help] - [About ScanSnap Manager], then click [Detail] button on "Version Information" window. "USB type" is displayed in "Scanner and driver information." (*2): The term "Multi-feed" refers to an error in which two or more sheets are fed into the scanner simultaneously. * The latest information, which is updated on an as-needed basis, is available at the FAQ corner of our website. Please visit the website at: http://scansnap.fujitsu.com/ 124