Fujitsu S510M Operator's Guide - Page 71

3.4 Changing Scan Settings Output image size You can specify an image size to output images of scanned documents. You can select it from the following paper sizes. Mode: Create facing pages in one image Automatic detection A3 (297 x 420 [mm]) B4 (JIS) (257 x 364 [mm]) - 11 x 17 (11 x 17 [in.], 279.4 x 431.8 [mm]) - - Mode: Create front and back images separately Automatic detection - Carrier Sheet size (216 x 297 [mm]) A4 (210 x 297 [mm]) A5 (148 x 210 [mm]) A6 (105 x 148 [mm]) Post Card (100 x 148 [mm]) B5 (JIS) (182 x 257 [mm]) B6 (JIS) (128 x 182 [mm]) Letter (8.5 x 11 [in.], 216 x 279.4 [mm]) - Photo E Portrait (83 x 117 [mm]) Photo E Landscape (117 x 83 [mm]) Photo L Portrait (89 x 127 [mm]) Photo L Landscape (127 x 89 [mm]) Photo LL Portrait (127 x 178 [mm]) Photo LL Landscape (178 x 127 [mm]) Business Card Portrait (55 x 90 [mm]) Business Card Landscape (90 x 55 [mm]) Custom (up to 5 sizes can be created) 3 Basic Scanner Operations • When you select [Automatic detection] in the "Output image size" drop-down list, HINT scanned document sizes are automatically detected, and each image is output in a standard size (other than Custom and Carrier Sheet Size) in the above table, which best matches the original document size. You do not have to select a size in the "Output image size" drop-down list every time. • When you select [Carrier Sheet size] in the "Output image size" drop-down list, images are output in the Carrier Sheet size. With Adobe Acrobat, you can trim images to create images in a preferred size. In Adobe Acrobat, to trim an image, select [Tools] from the menu bar, and select [Advanced Editing] D [Crop tool]. Select an rectangular area you want to trim using the Crop tool, and then double-click the selected area. ScanSnap S510M Operator's Guide 55