Fujitsu S510M Operator's Guide - Page 61
Color mode, Scanning side, Continue scanning after current scan is finished
UPC - 097564307324
View all Fujitsu S510M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3.4 Changing Scan Settings ■ Color mode: Specify whether to scan documents in color mode or in black-and-white mode. By clicking , you can select one of the following modes: • Auto Color Detection (Automatically recognizes the document color) ScanSnap automatically recognizes whether the document to be scanned is color or black-and-white, and switches the scan mode accordingly. • Color All documents are scanned in the color mode. This setting is for scanning color documents. • B&W All documents are scanned in B&W mode. This setting is for scanning black-and-white documents containing mostly text. File sizes can also be kept smaller than if the document is scanned in the color mode. 3 Basic Scanner Operations In normal circumstances, use "Auto Color Detection." HINT If this setting is specified, you do not have to change the color mode each time you scan a document. *However, the following types of color documents may be recognized as black and white: - Faintly-toned documents - Documents that have a slightly-colored portion To scan such documents in color, select "Color" in the "Color mode" drop-down list. In addition, the following type of documents may be recognized as color. - Documents with many shaded (gray) areas To scan such a document in B&W mode, select B&W from the "Color mode" drop-down list. ■ Scanning side: Specify whether to scan in "Duplex scan" or "Simplex scan" mode when the [SCAN] button on the scanner is pressed. By clicking , select either of the above modes. ■ Continue scanning after current scan is finished: If the checkbox is marked, the following message appears after scanning. ScanSnap S510M Operator's Guide 45