Gateway 9210 Gateway 9210 Server User Guide - Page 40
If you are replacing a drive, slide it forward and out of the drive bay.
View all Gateway 9210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5 Remove the shield for the bay into which you are installing the new drive. Shields 6 If you are replacing a drive, disconnect the drive cables. 7 If there is a shipping thumbscrew installed next to the drive release latch, remove the thumbscrew. 8 Slide the drive release latch back toward the rear of the case until the unlock icon is visible. Unlock icon 9 If you are replacing a drive, slide it forward and out of the drive bay. 10 Set any jumpers on the new drive. See the drive's documentation for further instructions. www.gateway.com 35
35
www.gateway.com
5
Remove the shield for the bay into which you are installing the new drive.
6
If you are replacing a drive, disconnect the drive cables.
7
If there is a shipping thumbscrew installed next to the drive release latch, remove
the thumbscrew.
8
Slide the drive release latch back toward the rear of the case until the unlock icon is
visible.
9
If you are replacing a drive, slide it forward and out of the drive bay.
10
Set any jumpers on the new drive. See the drive’s documentation for further
instructions.
Shields
Unlock icon