Gateway 9210 Gateway 9210 Server User Guide - Page 73
Invalid password, Memory errors were detected while the system started up, Memory size error
View all Gateway 9210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Invalid password ■ Enter your password again. Some passwords are case sensitive. ■ If you do not know the password, you may need to reinstall the software you are trying to access. ■ System startup passwords are stored in BIOS. If this password has been set and you do not know it, you may be able to reset the password through system board jumper settings. For instructions, see "Changing jumper settings" on page 60. Memory errors were detected while the system started up ■ See "Memory errors were detected during server start up" on page 74 for a possible solution. Memory size error ■ Restart your server, then open the BIOS Setup utility by pressing and holding F2 while your server restarts. Save the memory configuration. Missing operating system ■ The master boot record may be corrupt. For troubleshooting information, see "The master boot record is corrupted" on page 74. System Event Log Full ■ Clear the event log. To clear or view the event log, restart your server, then open the BIOS Setup utility by pressing and holding F2 while your server restarts. Select the Server menu, then select the Event Log Configuration menu. - OR - Clear the System Event Log using the System Setup Utility, for more information, see "Viewing System Event Log information" on page 21. 68 www.gateway.com