Gateway 9210 Gateway 9210 Server User Guide - Page 66
Function/Mode, Jumper Setting, Configuration
View all Gateway 9210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Item Function/Mode A Normal boot Recovery boot Jumper Setting Pins 1 and 2 Pins 2 and 3 B BIOS bootblock Pins 4 and 5 protect BIOS bootblock unprotect Pins 5 and 6 C Password protect Pins 7 and 8 Password clear Pins 8 and 9 D CMOS normal Pins 10 and 11 Configuration The BIOS uses current configuration information and passwords for booting. The BIOS attempts to recover the BIOS configuration. A formatted BIOS recovery diskette is required. The BIOS bootblock is in protected mode. The BIOS bootblock is in unprotected mode and can be updated (flashed) with a current BIOS. For more information, see "Updating the BIOS" on page 59. The system password setting is in protected mode. The system password setting is in unprotected mode. The CMOS is in normal operation. CMOS clear Pins 11 and 12 The CMOS content is cleared. 8 Follow the instructions in "Closing the server case" on page 31. 9 Turn on your server. Your server completes the action specified by the jumper setting you made. 10 Turn off the server, then disconnect the power cord. 11 Open the case again. For instructions, see "Opening the server case" on page 30. 12 Return the jumper in its initial setting on J1D1 to change the setting you made in Step 7 back to the normal setting. 13 Follow the instructions in "Closing the server case" on page 31. www.gateway.com 61