Gateway 9210 Gateway 9210 Server User Guide - Page 59
Replacing the fan
View all Gateway 9210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Replacing the fan To replace the fan: 1 Follow the instructions in "Preventing static electricity discharge" on page 29. 2 Follow the instructions in "Opening the server case" on page 30. 3 Unplug the case fan from the system board. Rear fan connector 4 Use a narrow tool, such as a small screwdriver, to push each of the four fan mounting rivets and sleeves out toward the back of the case. 5 Remove each rivet, then remove the old fan. 54 www.gateway.com
54
www.gateway.com
Replacing the fan
To replace the fan:
1
Follow the instructions in
“Preventing static electricity discharge” on page 29
.
2
Follow the instructions in
“Opening the server case” on page 30
.
3
Unplug the case fan from the system board.
4
Use a narrow tool, such as a small screwdriver, to push each of the four fan mounting
rivets and sleeves out toward the back of the case.
5
Remove each rivet, then remove the old fan.
Rear fan connector