Gateway 9210 Gateway 9210 Server User Guide - Page 86
System board specifications
View all Gateway 9210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
System board specifications Processor Chipset Memory PCI devices/slots VGA LAN SCSI ACPI mPGA478 package 800/533/400 MHz system bus Supports either 1 Intel Pentium 4 or 1 Intel Celeron CPU Intel 827210 ■ Intel 827210 Memory Controller Hub (MCH) (Northbridge) ■ Intel 6300ESB I/O controller (Southbridge) ■ Intel 82802AC 8 Megabit Firmware Hub (FWH) ■ Four 184-pin DDR SDRAM Dual Inline Memory Module (DIMM) slots support as much as 4 GB unbuffered ECC system memory ■ Support for single-sided or double-sided DIMMs (DDR266/333/400) ■ To run DDR400 memory at full speed use an Intel Pentium 4 processor with 800 MHz system bus frequency. ■ To run DDR333 memory at full speed use an Intel Pentium 4 processor with 533 MHz system bus frequency. Note: DDR333 memory will run at 320 MHz frequency when you use an Intel Pentium 4 processor with system bus frequency of 800 MHz. ■ To run DDR266 memory use with an Intel Pentium 4 processor with 400 MHz or 533 MHz system bus frequency only. Three PCI-X 64-bit PCI slots One 32-bit PCI slot On-board ATI Rage XL ■ 8 MB SDRAM ■ 1600 × 1200 (2D) max ■ 1024 × 768 (3D) max ■ One Intel 82547EI Platform LAN Connect (PLC) device for 10/100/1000 Mbps Ethernet LAN connectivity ■ One Intel 82551QM device for 10/100 Mbps Ethernet LAN connectivity ■ Optional add-in Ultra 320 SCSI controller card through the PCI slot. ACPI compliance Supports: ■ S0 ■ S1 ■ S4 ■ S5 www.gateway.com 81