Gateway GT5436E 8511861 - Gateway Computer Hardware Reference for Windows Vist - Page 54
Replacing the heat sink and, processor
View all Gateway GT5436E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
CHAPTER 4: Upgrading Your Computer 3 Remove the three screws that secure the power supply to your computer. Screws 4 Slide the power supply away from the back of your computer, then pull it down and remove it. 5 Install the new power supply into the case, then install the three screws to secure the power supply to the case. 6 Reconnect the power supply cables using your notes from Step 2. 7 Replace the side panel by following the instructions in "Replacing the side panel" on page 33. Replacing the heat sink and processor Tools You need a Phillips screwdriver to replace the heat sink. To replace the heat sink and processor: 1 Remove the side panel by following the instructions in "Removing the side panel" on page 31. 48
CHAPTER
4
: Upgrading Your Computer
48
3
Remove the three screws that secure the power supply
to your computer.
4
Slide the power supply away from the back of your
computer, then pull it down and remove it.
5
Install the new power supply into the case, then install
the three screws to secure the power supply to the case.
6
Reconnect the power supply cables using your notes
from
Step 2
.
7
Replace the side panel by following the instructions in
“Replacing the side panel” on page 33
.
Replacing the heat sink and
processor
To replace the heat sink and processor:
1
Remove the side panel by following the instructions in
“Removing the side panel” on page 31
.
Tools
You need a Phillips screwdriver to replace the heat sink.
Screws