Gateway GT5436E 8511861 - Gateway Computer Hardware Reference for Windows Vist - Page 58
Adding or replacing an, expansion card
View all Gateway GT5436E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
CHAPTER 4: Upgrading Your Computer 4 Remove the screw that secures the I/O panel to your computer, then remove the I/O panel from your computer. Screw 5 Insert the new I/O panel into your computer, then replace the screw. 6 Connect the I/O panel cable to the new I/O panel. 7 Replace the front bezel by following the instructions in "Replacing the front bezel" on page 32. 8 Replace the side panel by following the instructions in "Replacing the side panel" on page 33. Adding or replacing an expansion card To add or replace an expansion card: 1 Remove the side panel by following the instructions in "Removing the side panel" on page 31. 2 If you are replacing an expansion card, go to the next step. If you are adding a new expansion card, go to Step 4. 3 Disconnect any cables that are attached to the card, noting their locations and orientation. (You may need to reconnect the cables after you install the new card.) 52