Gateway NV-59C Service Guide - Page 145
Replacing the ODD Module, flush with the casing.
View all Gateway NV-59C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Replacing the ODD Module 1. Press the bezel into the tray, bottom edge first, to 2. Place the bracket on the ODD module. secure it to the ODD Module. 3. Secure the ODD bracket with the two (2) screws. 4. Push the ODD Module into the ODD bay until it is 5. Replace the one (1) screw to secure the Module. flush with the casing. Chapter 3 135
Chapter 3
135
Replacing the ODD Module
1.
Press the bezel into the tray, bottom edge first, to
secure it to the ODD Module.
2.
Place the bracket on the ODD module.
3.
Secure the ODD bracket with the two (2) screws.
4.
Push the ODD Module into the ODD bay until it is
flush with the casing.
5.
Replace the one (1) screw to secure the Module.