Gateway NV-59C Service Guide - Page 93
Removing the CPU, See Removing the Thermal Module
View all Gateway NV-59C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Removing the CPU IMPORTANT: The pins on the underside of the CPU are very delicate. If they are damaged, the CPU may malfunction. Place the CPU on a clean, dry surface when it is not installed. 1. See "Removing the Thermal Module" on page 81. 2. Using a flat-bladed screw driver, rotate the CPU locking screw 180° clockwise as shown. 3. Lift the CPU clear of the socket as shown. Chapter 3 83
Chapter 3
83
Removing the CPU
IMPORTANT:
The pins on the underside of the CPU are very delicate. If they are damaged, the CPU may
malfunction. Place the CPU on a clean, dry surface when it is not installed.
1.
See “Removing the Thermal Module” on page 81.
2.
Using a flat-bladed screw driver, rotate the CPU locking screw 180° clockwise as shown.
3.
Lift the CPU clear of the socket as shown.