GE DIGIA209-160 User Manual - Page 24

16 Digia II User Manual Network The Network submenu has three of its own submenus. They are Network configuration, Network email, and Network DDNS. Network configuration Figure 10 shows the Network configuration submenu. Figure 10. Network configuration Digia II Menu - Network > Data Port 00554 HTTP Port 00080 Control Port 01600 Client Access Bandwidth Saving 8192 Network type IP Address Subnet Mask Gateway DNS Server DHCP 000.000.000.000 000.000.000.000 000.000.000.000 168.095.001.001 Table 6. Network configuration submenu Menu item Data port HTTP port Control port Client access Bandwidth saving Network type IP Subnet mask Description Default is 00554. Default is 00080. Default is 01600. Check this box if you want to enable access to the Digia II over a network. Default is 8192 KB. Select between 10 and 8192 KB. This limits the bandwidth for the network stream. Choose between Static and DHCP. DHCP will assign values to the IP, subnet, gateway, and DNS server values automatically. The IP address of the unit. If you choose static as a network type, you can set the IP address by highlighting the number you want to change, hit Enter, and then use the up and down arrow to change the values. Hit Enter again to set the number, then use the left or right arrows to move to another position and repeat to change that number. The subnet mask of the unit. If you choose static as a network type, you can set the subnet mask the same way as you set the IP address.