GE NX-8 Installation Manual - Page 38
DESCRIPTION, DEFAULT, PROGRAMMING DATA, Segment #1, Segment #2
UPC - 782136401462
View all GE NX-8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
LOC PG DESCRIPTION DEFAULT PROGRAMMING DATA 11 14 PHONE #2, SELECTING WHICH PARTITIONS REPORT TO PHONE #2 Segment #1 (Circle Numbers To Program) 1 Partition #1 2 Partition #2 3 Partition #3 4 Partition #4 5 Partition #5 6 Partition #6 7 Partition #7 8 Partition #8 12 14 PHONE #3 14-14-14-14-14-14-14-14-14-14 14-14-14-14-14-14-14-14-14-14 13 14 PHONE #3, ACCOUNT CODE 14 14 PHONE #3, REPORTING FORMAT 15 15 PHONE #3, DIAL ATTEMPTS BACKUP CONTROL 10 - 10 - 10 - 10 - 10 - 10 0 8 0 ______ _ _ _ 16 15 PHONE #3, SELECTING EVENTS TO REPORT TO PHONE #3 Segment #1 (Circle Numbers To Program) Segment #2 (Circle Numbers To Program) 1 Alarms and Restores 2 Open/Close 3 Bypass 4 Zone Trouble 5 Power Trouble (AC Failure or Low Battery) 6 Siren & Telephone Fault 7 Test Reports 8 Program, Download, & Log Full 1 Tampers 2 Short Circuit & Ground Fault 3 Sensor Lost 4 Sensor Low Battery 5 Expander Trouble 6 Failure To Communicate 7 Reserved 8 Reserved 17 15 PHONE #3, SELECTING WHICH PARTITIONS REPORT TO PHONE #3 Segment #1 (Circle Numbers To Program) 1 Partition #1 2 Partition #2 3 Partition #3 4 Partition #4 5 Partition #5 6 Partition #6 7 Partition #7 8 Partition #8 18 16 FORMAT OVERRIDE Segment #1 (Circle Numbers To Program) Segment #2 (Circle Numbers To Program) 1 On = 1800hz transmit; Off = 1900hz 1 On = pager format (no handshake required) 2 On = 2300hz handshake; Off = 1400hz. 2 On = 1400/2300 handshake 3 On =cksum parity; Off = double round parity 3 Reserved 4 On = 2 digit event code; Off = 1 digit code 4 Reserved 5 Reserved. 5 On = Contact ID 6 Reserved. 6 On = SIA 7 On = 20 p.p.s.; Off = 10 or 40 p.p.s. 7 On = Contact ID or 4+3 8 On = 10 p.p.s.; Off = 20 or 40 p.p.s. 8 On = DTMF Segments #3 & #4 RESERVED Page 38