GE NX-8 Installation Manual - Page 51

APPENDIX 1 REPORTING FIXED CODES IN CONTACT ID AND SIA The table below list the event codes sent for the following reports (if enabled) when using CONTACT ID or SIA formats. REPORT CONTACT ID SIA MANUAL TEST 601 RX AUTOTEST 602 RP OPEN (user number) 401 OP CLOSE (user number) 401 CL CANCEL (user number) 406 OC DOWNLOAD COMPLETE 412 RS START PROGRAM 627 LB END PROGRAM 628 LX GROUND FAULT 310 GF GROUND FAULT RESTORE 310 GK RECENT CLOSE (user number) 401 CR EXIT ERROR (user number) 457 EE EVENT LOG FULL 605 JL FAIL TO COMMUNICATE 354 RT EXPANDER TROUBLE (device number) 333 ET EXPANDER RESTORE (device number) 333 ER TELEPHONE FAULT 351 LT TELEPHONE RESTORE 351 LR SIREN TAMPER (device number) 321 YA SIREN RESTORE (device number) 321 YH AUX POWER OVER CURRENT (device number) 312 YP AUX POWER RESTORE (device number) 312 YQ LOW BATTERY (device number) 309 YT LOW BATTERY RESTORE (device number) 309 YR AC FAIL (device number) 301 AT AC RESTORE (device number) 301 AR BOX TAMPER (device number) 137 TA BOX TAMPER RESTORE (device number) 137 TR KEYPAD TAMPER 137 TA KEYPAD PANIC (audible) 120 PA KEYPAD PANIC (silent) 121 HA DURESS 121 HA KEYPAD AUXILIARY 1 110 FA KEYPAD AUXILIARY 2 100 MA RF SENSOR LOST (zone number) 381 *T RF SENSOR RESTORE (zone number) 381 *R SENSOR LOW BATTERY (zone number) 384 XT SENSOR BATTERY RESTORE (zone number) 384 XR ZONE TROUBLE (zone number) 380 *T ZONE TROUBLE RESTORE (zone number) 380 *R ZONE TAMPER (zone number) 137 TA ZONE TAMPER RESTORE (zone number) 137 TR ZONE BYPASS (zone number) 570 *B BYPASS RESTORE (zone number) 570 *U THE NUMBER IN PARENTHESES FOLLOWING THE EVENT IS THE NUMBER THAT WILL BE REPORTED AS THE ZONE NUMBER. IF THERE ARE NO PARENTHESES, THE ZONE WILL BE A0". SEE PAGE 53 FOR THE DEVICE NUMBERS. * The character transmitted in this slot will be the first character from the event code of the zone that is bypassed or in trouble. (See locations 110 - 141) Page 51