Gigabyte GA-8IPXDR-E User Manual - Page 39
Floppy Drive A/B, IDE Primary Master, Slave / Secondary Master, Slave
View all Gigabyte GA-8IPXDR-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
BIOS Setup Floppy Drive A/B This category identifies the type of floppy disk drive A or drive B that have been installed in the computer. None No floppy drive installed 1.2MB, 3.5 in. 3.5 inch AT-type high-density drive; 1.2M byte capacity 720K, 3.5 in. 3.5 inch double-sided drive; 720K byte capacity 1.44M, 3.5 in. 3.5 inch double-sided drive; 1.44M byte capacity. 2.88M, 3.5 in. 3.5 inch double-sided drive; 2.88M byte capacity. IDE Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press . Such information should be provided in the documentation form your hard disk vendor or the system manufacturer. TYPE 1-46: Predefined types. Users: Set parameters by User. Auto: Set parameters automatically. (Default Vaules) CD/DVD: Use for ATAPI CD/DVD-ROM drives. ARMD: Use for ATAPI Removable Media Device. Cylinders Write Precompensation SECTORS Maximum Capacity LBA Mode Block Mode Number of cylinders Write precompensation Number of sectors Maximum Capacity This field shows if the device type in the specific IDE channel support LBA Mode This field only shows the information of Block Mode. 39