Gigabyte GA-EP45-DS3 Manual - Page 99
IntelR ICH10R SATA AHCI Controller, IntelR ICH8R/ICH9R/ICH10R SATA RAID, Controller
View all Gigabyte GA-EP45-DS3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Step 3: When a screen as shown in Figure 8 appears, select Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller (Note) and press Next. Figure 8 Step 4: After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system and then press Next to continue the OS installation (Figure 9). Figure 9 (Note) The item displayed in Figure 8 will be shown as Intel(R) ICH10R SATA AHCI Controller when the SATA controllers are set to AHCI mode. - 99 - Appendix
Appendix
- 99 -
Figure 8
(Note)
The item displayed in Figure 8 will be shown as
Intel(R) ICH10R SATA AHCI Controller
when the SATA controllers are set to AHCI mode.
Step 3:
When a screen as shown in Figure 8 appears, select
Intel(R) ICH8R/ICH9R/ICH10R SATA RAID
Controller
(Note)
and press
Next
.
Step 4:
After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system
and then press
Next
to continue the OS installation (Figure 9).
Figure 9