Gigabyte GA-M55plus-S3G Manual - Page 32
IDE Channel 0/1 Master/Slave, IDE Channel 2, 3, 4, 5 Master - f6
View all Gigabyte GA-M55plus-S3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
English 2-1 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2006 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) Thu, Jun 17 2006 22:31:24 Item Help Menu Level` ` IDE Channel 0 Master ` IDE Channel 0 Slave ` IDE Channel 1 Master ` IDE Channel 1 Slave ` IDE Channel 2 Master ` IDE Channel 3 Master ` IDE Channel 4 Master ` IDE Channel 5 Master [None] [None] [None] [None] [None] [None] [None] [None] Change the day, month, year Sun. to Sat. Jan. to Dec. Drive A Floppy 3 Mode Support Halt On Base Memory Extended Memory [1.44M, 3.5"] [Disabled] [All, But Keyboard] 640K 511M 1 to 31 (or maximum allowed in the month) 1999 to 2098 KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Date The date format is , , , . Week The week, from Sun to Sat, determined by the BIOS and is display-only Month The month, Jan. Through Dec. Day The day, from 1 to 31 (or the maximum allowed in the month) Year The year, from 1999 through 2098 Time The times format in . The time is calculated based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. IDE Channel 0/1 Master/Slave IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. IDE Channel 0/1, Master/Slave IDE/SATA Device Setup. You can use one of three methods: Auto Allows BIOS to automatically detect IDE/SATA devices during POST (default) None Select this if no IDE/SATA devices are used and the system will skip the automatic detection step and allow for faster system start up. Manual User can manually input the correct settings Access Mode Use this to set the access mode for the hard drive. The four options are: CHS/LBA/Large/Auto. (Default:Auto) IDE Channel 2, 3, 4, 5 Master IDE Auto-Detection Press "Enter" to select this option for automatic device detection. Extended IDE Drive. IDE/SATA Device Setup. You can use one of the two methods: Auto Allows BIOS to automatically detect IDE/SATA devices during POST (default) None Select this if no IDE/SATA devices are used and the system will skip the automatic detection step and allow for faster system start up. GA-M55plus-S3G (rev. 3.0) Motherboard - 32 -