HP 12000 HP StorageWorks 12000 Gateway Virtual Library System User Guide (AH81 - Page 131
Create Virtual Library Wizard window 2 of 12, Next Step, Maximum, Slots, Maximum Slots
View all HP 12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
6. Click Next Step. The next wizard window opens and displays the default values in the Maximum Slots, Maximum Ports, and Maximum Drives boxes based on the physical tape library emulation selected (Figure 26). Figure 26 Create Virtual Library Wizard window (2 of 12) . 7. Enter the maximum number of cartridge slots that may be added to the library in the Maximum Slots box. The default values in the Maximum Slots box is based on the physical tape library you selected. CAUTION: Changing the defaults can have unpredictable results if your backup application expects a certain number of slots in a specific library type. 8. Enter the maximum number of input/export ports on which the library may be configured to be visible in the Maximum Ports box. 9. Enter the maximum number of tape drives the library may contain in the Maximum Drives box. NOTE: The maximum values entered cannot be changed later. So, consider your potential future requirements when entering values. Not all of the tape drives and cartridges must be created at this time. You may add tape drives later. 10. Click Next Step. A window opens indicating that by default all libraries connected to the VLS have access to all hosts. 11. Click Create Library. A summary window opens and displays details about the library emulation created. HP StorageWorks 12000 Gateway Virtual Library System User Guide 131