HP 12000 HP StorageWorks 12000 Gateway Virtual Library System User Guide (AH81 - Page 193
USB LAN Adapter Components, This provides an image and description of the USB LAN adapter.
View all HP 12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Item 9 10 Description Status Port LEDs (Green - overlaid with the port number) Displays port link information, network activity information, whether the port is configured for full-duplex operation, or the speed of the connection, depending on the LED Mode selected. • If the Link (Lnk) indicator LED is lit, each port LED displays link information for the associated port. If the port LED is in Link mode and it is blinking, the port has failed its self test. The Fault and Self-Test LEDs will be blinking simultaneously. • If the Activity (Act) indicator LED is lit, each port LED displays activity information for the associated port - it flickers as network traffic is received and transmitted through the port. • If the Full Duplex (FDx) indicator LED is lit, the port LEDs light for those ports that are operating in full duplex mode. • If the Speed (Spd) indicator LED is lit, the port LEDs behave as follows to indicate the connection speed for the port: • OFF = 10 Mb/s • Flashing = 100 Mb/s (the flashing behavior is a repeated on/off cycle once every 0.5 sec.) • ON = 1000 Mb/s T/M LEDs For the dual-personality ports (ports 21 through 24), indicates which connector is enabled: • T = Indicates the 10/100/1000Base-T RJ-45 port is enabled. • M = Indicates the mini-GBIC port is enabled. 1The blinking behavior is an on/off cycle once every 1.6 seconds, approximately. USB LAN Adapter Components This section provides an image and description of the USB LAN adapter. Item Description 1 USB LAN adapter 2 LAN cable 3 USB cable HP StorageWorks 12000 Gateway Virtual Library System User Guide 193