HP 12000 HP StorageWorks 12000 Gateway Virtual Library System User Guide (AH81 - Page 174
default, keeps change of using periods instead of colons, changes periods to back to colons
View all HP 12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Command getStoragePool Usage 1 Returns information about the storage pool, such as primary LUN name, allocated capacity, capacity, extent size, used capacity, and number of LUNs. Where the options are: -a - Storage pool name (StoragePool_#) (optional) -h - Displays command usage information (optional) getStoragePoolSum- Returns summary of storage pool information for all storage pools on the VLS. mary addHost Adds the specified host in the SAN list. listHostState Lists the current host state for all hosts in the SAN list. setHostState Sets the host state for specified host. setHostStateAll Sets the host state for all hosts in the SAN list to the state specified. listAccessMode Lists the current host access mode for all enabled hosts in the system. setAccessMode Sets the host access mode for all enabled hosts in the system. setAlias Sets the alias for the hostname of the specified host. removeHost Deletes the specified host from the SAN list. addLunMap Adds the specified device to the host. listLunMap Lists the host LUN map for specified device. deleteLunMap Deletes the specified device from the host. getTapeSerialCompat- Returns the compatibility mode for the virtual serial numbers. ibilityMode setTapeSerialCompatibilityMode Sets the compatibility mode for the virtual serial numbers. Upgrading to VLS firmware version 3.3.0 cause the colons in serial numbers to change to periods. -m - Compatibility mode • Standard = default, keeps change of using periods instead of colons • Legacy = changes periods to back to colons getWwnnCompatibil- Returns the firmware version compatibility mode for the WWNNs. ityMode setWwnnCompatibilityMode Sets the firmware version compatibility mode for the WWNNs. Upgrading to VLS firmware version 3.3.0 causes the WWNNs for the VLS host ports to change to begin with 20 instead of 50. -m - Compatibility mode • 3.2.X = default, keeps change of using 20 instead of 50 • 3.1.X = changes 20 back to 50 (use if you just upgraded from version 3.1.x or version 3.2.x with the hp_3.2.2_reboot_101.zip patch installed) • 2.X = changes 20 back to 50 (use if you just upgraded from version 2.x and you have UNIX servers connected to the VLS over the SAN) 1 = string; = number; = filename 174 CLI Command Set