HP 12000 HP StorageWorks 12000 Gateway Virtual Library System User Guide (AH81 - Page 51
Connecting a Destination Library, Supported Destination Library Configurations
View all HP 12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
5. Transfer the physical tapes to the remote site 6. Import data from the tapes onto the remote LAN/WAN replication target Once the tape initialization process is complete, the automatic migration of deduplicated data from the source site to the target site over the LAN/WAN begins. See "Exporting Data to Physical tapes for Tape Initialization" on page 78 and "Importing Data from Physical Tapes for Tape Initialization" on page 79 for the specific procedures. Connecting a Destination Library Automigration requires one or more dedicated destination libraries to be connected to the VLS device. Supported Destination Library Configurations Automigration is supported on: • HP MSL series tape libraries • HP EML series tape libraries or library partitions • HP ESL E-series tape libraries or library partitions • HP VLS virtual libraries Using automigration, you can share a single destination library across multiple virtual libraries (maximum of 20 drives on the physical libraries), or configure multiple destination libraries to be used in a single virtual library. CAUTION: Automigration only supports destination libraries that have homogeneous drive types; for example, all drives are LTO-2. A mixture of drive types in the destination library, such as LTO-3 and LTO-2, is not supported. NOTE: Automigration allows you to use a VLS as a destination library. Because of this feature, it can also be used as a device-to-device local replication scheme. Connecting a Destination Library to the VLS12000 Gateway To connect the destination library to a Gateway device: 1. Connect your destination library to the VLS Gateway by connecting the library into the existing SAN zone that contains the arrays for this device. 2. Reboot the VLS. Upon reboot, the device detects the newly connected destination library. Managing and Unmanaging a Destination Library To manage a library is to enable automigration by connecting the source library to a destination library that is already on the VLS. Until you manage the destination library, it cannot communicate with the source. The process for managing destination libraries is different for SAN libraries than for HP StorageWorks 12000 Gateway Virtual Library System User Guide 51