HP 3150 HP LaserJet 3150 Product - (English) User Guide Book - Page 213
The HP LaserJet, product is, feeding multiple, sheets or jams, frequently from the, paper input bin or
UPC - 879889002135
View all HP 3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Problem Cause Solution The HP LaserJet Guides are not adjusted properly. 3150 product is feeding multiple sheets or jams frequently from the paper input bin or single-sheet input slot. Remove the paper from the paper input bin or the single-sheet input slot. Tap the sides of the paper stack together, then reinsert the stack. Or reinsert the single sheet into the slot. Slide the guides against the sides of the stack in the paper input bin or against the single sheet in the single-sheet input slot to center the paper. Make sure the guides are not adjusted too tightly. The paper input bin is too full. Remove some of the sheets. The paper input bin can hold up to 100 sheets of 20lb (75g/m2) bond weight paper (less for heavier paper) or up to 7 to 10 envelopes, depending on envelope construction and operating environment More than one sheet was placed in the single-sheet input slot. Place only one sheet at a time in the single-sheet input slot. If printing more than one sheet of the same type of media, use the paper input bin. The paper was poorly cut by the manufacturer and is sticking together. "Break" the ream of paper by curving it into an upside-down u-shape; this may effectively decrease multifeeds. You may also try turning the paper around to feed the opposite end first, or use a different type of paper. The paper does not meet HP's specifications for print media. Order HP's paper specification guide. To order, see "Ordering parts" on page 221. The output capacity was exceeded in the Do not allow more than 100 sheets of 20paper output bin or front paper output slot. lb (75 g/m2) bond weight paper (less for heavier paper) to fill the paper output bin. Do not allow media to stack up in front of the front paper output slot. The pick rollers are dirty and are not grabbing the paper. There may be a sensor that is not operating properly. See "Cleaning the print path" on page 216. Contact the Customer Service Center for service. See the front of this manual for support information. EN Solving paper feed problems 211