HP 3150 HP LaserJet 3150 Product - (English) User Guide Book - Page 25

Note Inserting a pause while dialing You can insert pauses into a fax number you are dialing or programming to a one-touch key, speed-dial code, or group-dial code. Pauses are often needed when dialing internationally. Press REDIAL/PAUSE to enter a two-second pause in your dialing sequence. A comma appears on the control panel display, indicating that the pause will occur at that point in the dialing sequence. If you enter the pause at the end of a number you are programming into a one-touch key, speed-dial code, or group-dial code, the HP LaserJet 3150 product waits to dial this number until you enter another number. (This is also known as concatenated dialing.) Using special dialing symbols After enabling special dialing symbols, you can use them when dialing a fax number or entering a fax number for a one-touch key, speed-dial code, or group-dial code. Before using special dialing symbols such as charge codes, you must enable them. See "Enabling special dialing symbols" on page 108. To use special dial symbols 1 When you reach the position in the fax number where you need the symbol, press *. 2 Use the < and > keys to scroll through the symbols until you reach the one you need and press ENTER/MENU. 3 The special symbol is entered into the fax number. It will be represented by a letter or punctuation mark. - Or Depending on the symbol you chose, you may be asked to make additional choices before the symbol is entered into the fax number. EN Sending faxes from the product 23