HP 3PAR StoreServ 7450 4-node HP 3PAR StoreServ 7450 Storage Installation Guid - Page 14
Power Distribution Units
View all HP 3PAR StoreServ 7450 4-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Power Distribution Units In each HP G3 rack, two PDUs are mounted horizontally at the bottom of the rack, numbered 0-1 from bottom to top. The default configuration for the HP Intelligent Series Racks is two PDUs mounted vertically at the bottom of the rack so to provide a front-mounting unit space. Make sure there is enough clearance for service. For example, the PDUs mounted vertically at the back of a rack must have enough clearance to remove node and drive chassis power supples. NOTE: Depending on the configuration, PDUs can be mounted vertically. 14 Identifying Storage System Components
Power Distribution Units
In each HP G3 rack, two PDUs are mounted horizontally at the bottom of the rack, numbered 0–1
from bottom to top. The default configuration for the HP Intelligent Series Racks is two PDUs mounted
vertically at the bottom of the rack so to provide a front-mounting unit space.
Make sure there is enough clearance for service. For example, the PDUs mounted vertically at the
back of a rack must have enough clearance to remove node and drive chassis power supples.
NOTE:
Depending on the configuration, PDUs can be mounted vertically.
14
Identifying Storage System Components